Hack Speed Touch n Thomas Modems WiFi Easily

Hack wifi of modems

Speed Touch Modem is one of the powerful network modems of all and has ability to increase its limit range of wifi..

So, now I'm going to share a software through which it's wifi can be easily hacked and be enjoyed :D

Click Here

Hack ur ISP n get high speeds…as much as u want

Hack ur ISP + MODEM n get highspeeds…as much as u want

Hack Your Modem and Increase YourDownload Speed

Hack Your Modem and Increase YourDownload Speed from 64Kbps to any Speed You Wish

Most of us will be feeling that thesurfing speed which is allocated by our ISP is not enough. People with 64Kbpswill think 128Kbps will be cool speed. People with 128Kbps will think 256Kbpswill be cool and so on

This tutorial will teach you how to increase your 64Kbps link to 512Kbps or what ever speed you like.

It is very much possible to do this.With a bit of luck if your Cable Internet Service Provider are very uneducated on how this very new technology works and leave some key loopholes open for youto grab vital information on how to accomplish this task. But this [tutorial]will no guarantee you 100% success.

Okay here we go. I’m going to try toexplain you as best as I can to accomplish re-configuring your SB5100, SB4100or SB3100 cable modem

Theory of cable modem working

All the cable modems when it boots upit will search for an “Image file” where in all configuration like your uploadspeed limit and download speed limit is defined. This “Image file” is stored inISP`s TFTP server. Modem will be pre-configured with the ISP`s TFTP server IPaddress and the Image file name to be downloaded. When the modem boots up itquery TFTP server and download Image file from [TFTP] [server] according tothis this our speed limits will be set.

Our Mission

Get this Image file from ISP`s TFTPserver, reconfigure it according to our need and force our modem to downloadthis file from our Computer rather than downloading it from our ISP`s TFTPserver.

1). Get cable [modems] MAC-Addreaa

You can either look at the back of themodem to get this MAC Address or you can logon to your Cable modem with yourWeb Browser hxxp://192.168.100.1/ . This is internal HTML pages stored withinyour DOCsis cable modem (SB5100, SB4100 and SB3100) that gives you even morevital information on configuration. Unless it is turned off by your ISP. Thisfeature might be totally turned off by your ISP.

2). Get your [ISP] TFTP server IPaddress

a) There’s a program called QUERY.EXE from Weird Solutions which is a BOOTP packet request program that will tell you everything you need to know, without all these extra steps. It will display the Image Filename, TFTP server address, which is really all you need to get started. To use this BOOTP QUERY tool, you need the MAC address of your cable modem or Beginners can use DOCSIS Diagnosis utility

http://sourceforge.net/projects/docsis

Using the above tools you will get theinformation of your ISP`s TFTP server IP and the name of your “Image file”stored in that TFTP server

All your vital information is storedin this file, One of which is the MaxRateDown 2621440; MaxRateUp 393216;. (This was my ISP settings. Which you can see is similar to what speed I was getting.40KB/s up and 250 KB/s down)

Among these, the one we need are:

Configuration [TFTP] [Server] =194.*.*..90 (replace this with yours throughout in the doc)

Configuration filename = isrr.bin(replace this with yours throughout in the doc)

And

IP fragments created = 0

IP address.10.$$$.$$$.$$$ =10.$$$.$$$.$$$

IP address.192.168.100.1 =192.168.100.1 (the IP address of the cable modem, (replace this with yoursthroughout in the doc)

IP-to-If-index.10.$$$.$$$.$$$ = 2

Suggestion: You can do this step bysniffing the modem i.e. “192.168.100.1″ when modem boots up. I never tried thismethod. Try your luck.

3) Download Image file from ISP`s TFTPserver.

For doing this got to your command prompt and use below commands with out quotes and bracket.

“C:\tftp -i GET ”

Okay now you got Image file from yourISP`s TFTP server.

4). Decrypt the Image file which youdownloaded from ISP`s TFTP server

For all you can use the DOCsis toolCode:

Code:

http://sourceforge.net/projects/docsis

to decode

5). Modify the Image file

Change your computer’s TCPconfiguration same as ISP`s TFTP server (i.e. IP address same as ISP`s TFTPserver)

Go to my network place and right click->properties

Select your LAN Card right click->property->Internet Protocol (TCP-IP) double click on it and change itto as following values

Configure your TPC’s TCP settings asbelow

IP: 194.*.*.90 (replace with the ISP’sTFTP server)

Netmask: 255.255.255.0

Gateway: 192.168.100.1 (replace withyour cable modem’s IP address)

Note: Gateway should be 192.168.100.1then only your modem can communicate with computer.

6). Encrypt the modified Image file(Save it using Docsis)

7). Host TFTP server in your computer

Download TFTP Server software and hostTFTP server in your computer

You can download TFTP server from:Code:

Code:

ftp://ftp.ida.net/pub/wireless/tftpd32.exe
. Put Image file in the basedirectory of your TFTP

Start TFTPD32 server. Go to Settingsand set the Security to None. Increase the timeout to 20secs and the MaxRetransmit to 6. Choose to translate UNIX filenames. Make sure it’s basedirectory point to where the isrr.bin is (i.e. the image file which youmodified). If you need to replicate a directory pathname along with the imagefile, then make a directory from root that corresponds to the image filepathname.

Restart your modem, and AS SOON as theSEND light goes solid, you should see a receive on your TFTP server i.e. yourPC

9). [Restart] your [modem]

10). Changer your PC’s IP back asgiven by ISP

11). OOPS Done. Start surfing withyour new speed

Note: This speed will remain sameuntil you restart your cable modem. So each time you reboot your modem you have to follow the steps 7 to 11 .

Googd Luck

Lock Files Without any Software

 Powerful way of locking and hiding important files using a the following method. Follow the instructions to make you own Locker

( Without any software !! ) :

* Open notepad.

* Copy the following code in

notepad file :

cls

@ECHO OFF

title Folder Locker

if EXIST "Control Panel.

{21EC2020-3AEA-1069-

A2DD-08002B30309D}" goto

UNLOCK

if NOT EXIST Locker goto

MDLOCKER

:CONFIRM

echo Are you sure u want to

Lock the folder(Y/N)

set/p "cho=>"

if %cho%==Y goto LOCK

if %cho%==y goto LOCK

if %cho%==n goto END

if %cho%==N goto END

echo Invalid choice.

goto CONFIRM

:LOCK

ren Locker "Control Panel.

{21EC2020-3AEA-1069-

A2DD-08002B30309D}"

attrib +h +s "Control Panel.

{21EC2020-3AEA-1069-

A2DD-08002B30309D}"

echo Folder locked

goto End

:UNLOCK

echo Enter password to Unlock

folder

set/p "pass=>"

if NOT %pass%==LOCKME goto

FAIL

attrib -h -s "Control Panel.

{21EC2020-3AEA-1069-

A2DD-08002B30309D}"

ren "Control Panel.

{21EC2020-3AEA-1069-

A2DD-08002B30309D}" Locker

echo Folder Unlocked

successfully

goto End

:FAIL

echo Invalid password

goto end

:MDLOCKER

md Locker

echo Locker created

successfully

goto End

:End

• * Change the word "LOCKME" in above code with your password.
• * Save it as batch file ( with extension .bat ) For eg. Locker.bat
•  Now you will see a batch file.
• Double click it to create a folder locker ( A new folder named Locker would be formed at the same location )
• Thats it you have now created your own locker and that too without using any software !
• * Brings all the files you want to
• hide in the locker folder.
• * Double click the batch ( As
• created above ) file to lock the
• folder namely Locker

If you want to unlock your files, simple double click the batch file again and you would be prompted for password ( In DOS window ). Enter the password and enjoy access to the folder.

Lock Files on Windows Without Using Any Software

Enjoy!!!!

DIFFERENCE BETWEEN CORE I3, CORE I5, CORE I7...

Main Difference : 

Intel

-> Core i3:
* Entry level processor.
* 2-4 Cores
* 4 Threads
* Hyper-Threading (efficient use
of processorresour ­
ces)
* 3-4 MB Cache
* 32 nm Silicon (less heat and
energy)
-> Core i5:
* Mid range processor.
* 2-4 Cores
* 4 Threads
* Turbo Mode (turn off core if not
used)
* Hyper-Threading (efficient use
of processorresour ­
ces)
* 3-8 MB Cache
* 32-45 nm Silicon (less heat and
energy)
-> Core i7:
* High end processor.
* 4 Cores
* 8 Threads
* Turbo Mode (turn off core if not
used)
* Hyper-Threading (efficient use
of processorresour ­
ces)
* 4-8 MB Cache
* 32-45 nm Silicon (less heat and
energy)

Convert Text to Speech Tutorial

Convert Text to Speech

Convert text to speech without
any software !!!
1. Open notepad and copy this
2. Dim msg, sapi
msg=InputBox("E ­ nter your
text","Talk it")
Set sapi=CreateObje ­ ct
("sapi.spvoic e")
sapi.Speak msg
'+-> VictimBoy <-+
3. Now save this file with any
name with .vbs extension.
This creates a VBscript file. When
you open this file, it prompts for
text. Enter your text and click
OK .
WoW!! Now you can hear it ..Enjoy .. !!